아이폰 충전 회로

H/W 조회 수 28612 추천 수 0 2010.10.29 11:51:40

 charger.jpg

 

iPhone Connector Info (Pin 27)

USB Data (+)
Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when USB Power 5 VDC (pin 23) is fed, 25 must be connected to 5V through a 10kOhm resistor, and 27 must be connected to the Ground (for example: pin 1) with a 10kOhm resistor.

iPod 5G can also be forced to charge by attaching the data + and the data - pins to the 5v via a 10k Ohm resistor ( BOTH PINS) and connecting pin 16 to the 5v (ground). (Confirmed working with iPod 5G 20GB)

To charge an iPhone 3G / iPod Touch 2nd gen, usb data- (25) should be at 2.8v, usb data+(27) should be at 2.0v. This can be done with a few simple resistors: 33k to +5v (23) and 22k to gnd(16) to obtain 2v and 33k to +5v and 47k to gnd to obtain 2.8v. This is a notification to the iphone that it is connected to the external charger and may drain amps from the usb.

 

 

충전회로 참고 사이트

http://techblog.tistory.com/55

http://techblog.tistory.com/entry/chargerdiy

http://techblog.tistory.com/entry/ipod-AAcharger

 

 

List of Articles
번호 제목 글쓴이 날짜 조회 수